World Class Designs

This unit was designed for High Shock impact found in above ground mining applications. Horizontal or vertical mounting for ease of installation. Remote Inhibit, Lock Out, Tag Out feature for safe and reliable operation. Available in 12V, 24V & 48VDC Outputs.

This unit was designed for Extended Performance, High Reliability applications. Power Factor Corrected Universal AC Input, Highly Regulated DC Output. Fully protected, Full output power to 50 deg C.

This unit was designed for a “No Down Time” Industrial Control application. Built in Redundancy and Battery Back-Up provided complete system operation with either a power supply failure or loss of AC input due to a disruption in utility power. Extended run times are available.

This unit was designed for remote locations where repair & maintenance would be difficult. Available in AC or DC Input versions. Unit can be mounted horizontally or vertically for ease of Installation. Tight regulation, Low Noise & Ripple.

This Single Output unit is designed for vertical integration in any industrial equipment where maintenance and diagnostics are easily accessible. Time Laps meter and LED indicators along with test points round out the operational condition of the unit. The units also has a removable fan filter for ease of maintenance. Available in outputs ranging from 3,3VDC to 48VDC and power levels up to 2000 Watts.

This High-Power Free-Standing cabinet can be used in various applications where High DC Output Power is required including Power Generation, Rail, Aircraft Power and Plant Automation & Control. Cabinet can be designed for Harsh Environment applications with optional Shock Mounts.

The above unit was designed for an airborne application for Mission Critical Systems. Unique design allowed for tight integration Into existing housing location. Wide Temperature Operation, Low Noise & Ripple.

Highly Rugged Portable Battery Charger is Designed & Tested to meet MIL-STD-810, MIL-STD-461, MIL-STD-1399 and operate in Harsh Military Environments. Full Battery Monitoring, Remote On/Off and full Protections including Low Voltage Battery Disconnect.

Completely fault tolerant DC-UPS is designed for Mission Critical Shipboard Applications.  Power Modules are Hot Swap active mission replaceable. Fully Protected and Conformal Coated for high moisture applications. Front Panel Diagnostics, including Digital Meters and Circuit Breaker. Fully Qualified.

Designed for High Impact survivability this unit boasts Shock Isolators, Conformal Coating of all electronics, louvered fan openings and MS Connectors. High Voltage DC Output and front panel operational indicators. Additional EMI Filter Package is also included.

Rugged Bolt Down DC-DC Converter with MS Connectors and removable fan filter for ease of maintenance. ON/Off Switch and front panel Input & output LED Indicators. Ruggedized for Shock & Vibration found in MIL-STD-810 & MIL-STD-167.

This Rugged Bulk Power unit is ideal for Ground Mobile & Fixed Shelter Military applications where 28VDC Bulk Power is needed. All electronics are have Conformal Coating and a Ruggedization Package for severe environment applications. Remote inhibit is included along with extended temperature operation.

Rugged, High Power DC-UPS System found on Above & Below Surface Naval applications. Shock Mounts, Battery Status and full output power to 50 deg C.  Meets MIL-STD-1399, MIL-STD-810, MIL-S-901, MIL-STD-167 and MIL-STD-461. Fully protected DC output. Internal high reliability fans, Additional run times available.

Low Profile DC-DC Converter for commercial applications including Multi-Level entertainment. Isolation between Input & Output, Full Protections including Over-Voltage, Over-Current And Over-Temperature. On board diagnostics and remote Inhibit features. Units can be paralleled for higher power.

Custom Panel Mount Power Supply with specialty connectors. Units boasts full protections Including Over-Temperature, Over-Voltage & Over Current. Low Profile 2 U Height along with Custom Paint and Silk Screen. Handles for ease of installation included.

Rugged DC-DC Converter for Commuter Rail applications. Wide 72 VDC Input range. Fully Isolated, additional EMI Filtering. Meets all Rail & Safety. All Electronics Conformally Coated, IP20 Enclosure and Extreme Ruggedization for high Shock & Vibration.

A fully enclosed DC-DC Converter designed for Airborne ground support equipment. Wide DC Input Range, 270 VDC Output @ 1000 Watts. Unit is Rack Mountable and can be placed in parallel for increased power. Ruggedized for High Shock & Vibration.

Designed for Datacom/Telecom applications, this unit boasts low noise and ripple and is a fully (N+1) Redundant Hot Swap Power Supply System. Light weight and compact it can be easily integrated into any communication system where High Power is needed. Fully protected. Available in a DC Input version.