Water Cooled Power Supplies

/Water Cooled Power Supplies
Water Cooled Power Supplies 2017-11-17T23:05:07+00:00

FEATURES

  • Water-Cooled •  Hot Swap / Rack Mount / Stand Alone
  • Full Programmability
  • Single or 3Ø Input
  • Rugged Construction
  • Parallel Operation
  • Soft Switching Min. Output Harmonics
  • Power Factor Corrected
  • N+1 Redundant Operation
  • RS232/485 Compatible

OVERVIEW

Technology Dynamics Inc. offers a wide range of custom Water Cooled Power Supplies that are designed typically for Military shipboard applications. These robust designs however make them ideal for severe environment industrial applications where forced air cooling is not an option. Water cooled Power Supplies offer an alternative to fan cooled designs where environmental conditions restrict or preclude the use of fans. Water Cooled Power Supplies also have higher power densities than air cooled power supplies. Available as fully contained stand alone systems or as blind mate modules which allow for Hot Swap Plug-In of the power supply modules resulting in no down time for critical applications. Our Water Cooled Power Supply Products are designed for maximum flexibility, accessibility and modularity in order to facilitate future power upgrades. Custom configurations, voltages and power levels are available, contact us for your exact needs.

SPECIFICATIONS

ELECTRICAL:

  • Input: 200 / 400 / 450 / 480 VAC
  • Output: 24V, 28V, 48V Standard (custom voltages available)
  • Power: 3000 – 25 KW Watts
  • Ripple: < 150 mV pk-pk
  • Efficiency: 90% min. at full load
  • Power Factor: 0.98 min. (per MIL-STD-1399)
  • Protection: Over-Voltage,  Over-Current, Over-Termperature
  • Operating Temperature: 0°C to +50°C (Standard)
  • Humidity: 0% to 95% non-condensing
  • Cooling: Water-Cooled, Liquid Cooled
  • Vibration: Per MIL-STD-167
  • Shock: 20G 11ms half sine pulses
  • Operating Altitude: -1000 ft. to +10,000 ft.
  • Reliability: Exceeds 100,000 hours

MECHANICAL

  • Construction: Rack Mount, Stand Alone, Hot Swap
  • Size: Standard 19” Rack Mount (Custom Widths Available)
  • Height: 3U – 10U Standard, Custom Cabinets Available
  • Connections: MS Circular Type (Input/Output)    Coolant Connections: Per Customer Spec.

AVAILABLE OPTIONS 

  • Ruggedization: For High Shock & Vibration To MIL-STD-810 G
  • EMI Filtering: EMI Filtering to MIL-STD-461 F
  • Redundancy: ORing Diodes For Redundant Operation
  • Conformal Coating: For High Humidity Applications
  • 400 Hz: 47-440 Hz
  • Hot Swap: Auto Insertion Modular Design
  • Meters: Digital or Analog